Pre-orders open · Release Nov 30 · Ships from Dec 15 Code BELIEVE for 30% off gear Shop now →
Support / Firmware
Firmware · build 68 · 2026-11-06

Firmware downloads

The OVERSIGHT app for Android downloads and installs these by itself (Firmware updates). To update from any phone or laptop browser instead, download the file for your box here while you have internet, then install it over the box's WiFi.

Relay
The firing-line relay (OVERSIGHT WiFi).
Download relay-68.bin
1.08 MB
Target hub
The box on the target stand with the sensor jacks.
Download hub-68.bin
0.99 MB
Wind unit
The wind add-on.
Download wind-68.bin
0.98 MB
Demo relay
Only for our demo-day relay. Customers: skip this one.
Download relay-demo-68.bin
1.09 MB

Install from a browser

  1. Relay: join the WiFi OVERSIGHT (password shoot1000), open http://192.168.4.1/update, choose the relay file, tap Install.
  2. Target hub: on the relay's page open Settings › Firmware updates › Open its update WiFi. Join OVERSIGHT-HUB-<number> (same password), open http://192.168.4.1, choose the hub file, tap Install. Then re-join OVERSIGHT.
  3. Wind unit: switch it on and within 3 minutes join OVERSIGHT-WIND-<number>, open http://192.168.4.1, choose the wind file, tap Install.

The update page checks the file is for that kind of box and refuses anything else. If the connection drops, the box keeps its current firmware: just try again. Phones sometimes leave a WiFi with no internet: if the page won't open, turn mobile data off for a minute. Full steps: Firmware updates manual.

Boxes on build 33 or older don't have the browser update page yet, and any box whose WiFi update won't go through: flash it over USB from a computer with Chrome or Edge.