Quick start
Unbox, set up the backer, pods, hub and relay, connect your phone and fire your first shots.
Everything to set up, run and update your OVERSIGHT system. Can't find it here? Email info@oversighttargets.com: we reply within one business day.
Unbox, set up the backer, pods, hub and relay, connect your phone and fire your first shots.
For range officers: plan the lanes, number the hubs, name and set up each target, shared boards, bench cards, two relays, running the line.
Update the relay and target hubs from the Android app or any browser, and what to do if an update fails.
Connection and shot problems, calibrating the centre, diagnostics mode and sending us data.
RINGER and the wind unit get their manuals when they ship.
The OVERSIGHT app for Android downloads and installs these by itself. To update from any browser, download the file for your box here while you have internet, then install it over the box's WiFi: see Firmware updates.
| Couldn't load the list. Open the firmware downloads. |
A failed or dropped update never changes the box: it keeps its current firmware, and you can try again. WiFi update won't go through? Flash over USB from a computer.
A 1-year limited warranty against manufacturing faults. Damage from being shot, dropped or modified isn't covered. Email us your order number and a photo and we'll sort it out.
Return within 30 days. Email us first with your order number.
We ship to the US, Canada, the UK, the EU, Australia and New Zealand. International orders: import duties, taxes and fees are the buyer's responsibility.
Any load still supersonic at the target (above about 1,150 fps). Subsonic loads won't register, and most .22 LR won't.
No. The relay makes its own WiFi and runs the app; phones join it. Internet is only needed to download firmware updates beforehand.
Any phone, tablet or laptop with a browser, on the relay's WiFi. There's also a free OVERSIGHT app for Android.
Settings › Frame and sensors: enter your target size (a 24 in target is 24 in), tap Fill for Lite mounts, Save. Full steps in the Quick start.
Check each pod's cable is in the hub jack with the same mark, then see Troubleshooting.